Configuring Citrix to work with Nintex RPA
Step 1: Configure Nintex Citrix Remote Controller
Step 2: Configure the Nintex RPA Studio and Robot on the client machines
Before you start
-
Make sure you have Citrix Workspace application installed on the client machines (Robot and Studio)
-
Make sure you have Administrator rights on the client machine in order to modify Windows Registry keys and register necessary libraries
-
Make sure you have .NET Desktop Runtime 3.1.13 installed on the Nintex RPA server.
-
Note that Citrix is supported only if you have administration access to the Citrix server.
Download and install Nintex-Citrix Remote Controller on the Citrix machine
-
Download the Nintex-Citrix Remote Controller and run it on the Citrix machine.
Note that the Nintex Citrix Remote controller is certified by Citrix.
-
Log-off and log back in to the machine in order for the Citrix Remote Controller to start working.
-
A dedicated tray icon will appear after login. You can right--click the Tray icon to stop or exit the Remote Controller.
If you have already installed Nintex Studio and Robot, proceed to the following procedure:
Configure Citrix post Nintex RPA clients installation
If you haven't installed Nintex RPA clients yet (Studio and Robot), you can enable the Citrix configuration on the clients during their installation. To do so, follow the following procedure: